 |
| |
 |
 |
| |
Evosolar offers a full range of solar thermal components. While Evosolar offers our systems in pre-packaged and engineered sizes, we realizes that every installation is site specific. All components and accessories are sold separately. |
| |
| |
|
Description |
| |
 |
EVOTEB
Single-coil, single-wall, indirect heat exchanger solar storage tank. Electrical heat
element back-up, glass-lined steel tank, with corrosion resistant anodized aluminum jacket, T/P valve, drain valve, temperature sensor, fully automatic controls,
1" NPT HE connections, 2" insulation, and two protective anodes. 6 year warranty. Available in 60, 75, and115 gallon sizes. UL listed. Made in the USA. |
| |
|
| |
 |
EVOTDC
Dual-coil, indirect heat exchanger solar storage tank. Upper heat exchanger coil
is single-wall construction, lower heat exchanger coil is double-wall construction.
Glass-lined steel tank, with corrosion resistant anodized aluminum jacket, T/P valve, drain valve, temperature sensor, fully automatic controls, 1"NPT HE connections, 2" insulation, and two protective anodes. 6 year warranty. Available in 55, 70, and 110 gallon sizes. UL listed. Made in the USA. |
| |
|
| |
 |
EVOTGB - COMING SOON!
Single-coil, single-wall, indirect heat exchanger solar storage tank. Natural Gas
element back-up with atmospheric ventilation [Ultra Low NOx availablle (CA)]
Glass-lined steel tank, with corrosion resistant anodized aluminum jacket, T/P
valve, drain valve, temperature sensor, fully automatic control, 1" NPT HE connections, 2" insulation, and two protective anodes. 6 year warranty. Available in 75 gallon capacity. UL listed. |
| |
|
| |
 |
EVOEC
Glazed flate plate collector, with chrome high-selective absorbancy. Shock-proof iron-tempered glass, glass and rock wool insulation, laser welding, robust black anodized aluminum outer construction. 1" headers, and 1/2" risers, EPDM seals. Flush and Tilt mounting kits. 10 year warranty. |
| |
|
| |
|
EVOEP
Glazed flate plate collector, with painted non-selective absorbancy. Shock-proof iron-tempered glass, glass and rock wool insulation, laser welding, robust black anodized aluminum outer construction. 1" headers, and 1/2" risers, EPDM seals. Flush and Tilt mounting kits. 10 year warranty. |
| |
|
| |
 |
EVOCMK-F
Flush mounting kit for EVOEC / EVOEP collectors. Black anodized aluminum, 1-5/8" x 4" solar strut with strut nut and collector clip (4 in each kit). |
| |
|
| |
.jpg) .jpg) |
EVOCMK-T
Tilt mounting kit for EVOEC / EVOEP collectors. Black anodized aluminum, front channel foot and various rear leg sizes 18", 24", 36", 48", and 60" (2 in each kit). |
| |
|
| |
 |
EVOD
Circulating unit for solar systems including Grundfos AC pump (Low Energy), shut-off valves, balancing valve with integrated flow meter [0-4 Gal/Min], fill and drain valves, thermometers [°C/°F], air vent, pressure relief valve [75 psi], and pressure gauge [psi]. Seat for digital controller built into insulation shell. |
| |
|
| |
 |
EVOC
Electronic control unit with system-monitoring display, user friendly three buttion menu, function control according to solar operating hours counter, 4 sensors, heat balancing, data communication/Bus, 115V power supply, outputs 1 electromechanical relay, basic system template, 1 pump capability. |
| |
|
| |
|
EVOC2
Electronic control unit with system-monitoring display, user friendly three buttion menu, function control according to BAW-standards and solar operating hours counter, 4 sensors, heat balancing, data communication/Bus, 115V power supply, outputs 2 electromechanical relay, 9 selectable system templates, with 2 pump capability. |
| |
|
| |
 |
EVOETK
Thermal Expansion Vessel with corrugated steel pipe and wall mount kit. 3/4" Male connection, Pre-charged at 40 psi. Certified to and listed by IAPMO PS88. |
| |
|
| |
 |
EVOTMV
Water Temperature Outlet Range: 95 - 120°F
Maxmimum Inlet Temperature: 210° F
Maximum Working Pressure: 145 psi
Robust bronze body construction, 3/4" valve, sweat union connections, tamper-proof valve setting. Certified to ASSE 1017 and CSA B125.3 and is listed by ASSE and IAPMO. Performance tested. |
| |
|
| |
 |
EVOPRV
Pressure relief valve, bronze body construction, stainless steel and brass internal parts, silicone seat, 3/4" NPT connections. Set working pressure 75 psi. Design certified by ANSI 21.22 and CSA 4.4 |
| |
|
| |
 |
EVOAAVK
Automatic Air Vent Kit for solar system conditions.
Vent Max working temperature: 320oF
Vent Max working pressure: 150 psi
Cross Fitting for Air Vent, Temperature Sensor, Return and Collector connections.
Air vent connection: ¾” Female NPT
Collector connection: ¾” Compression(Includes 3/8 Male x Female shut-off valve, works in conjunction) |
| |
|
| |
 |
EVOIT
Pre-wired and insulated tubing. 3/4" and 1" thick insulation, UV resistant outer covering, over 3/4" corrugated steel piping with built in wire. The light weight and flexibility of corrugated pipe along with the integrated wire yields an easy installation. Sold in 50 ft. lengths. Male NPT fittings and mounting hardware available. |
| |
|
| |
 |
EVOITF-M
Brass fitting for pre-wired insulated tubing: 3/4" Male NPT |
| |
|
| |
 |
EVOITF-SC
Brass fitting for pre-wired insulated tubing: 3/4" Straight Coupler |
| |
|
| |
 |
EVOITMB
Insulated tubing mounting bracket. Available for 1" and 3/4" insulation thicknesses. |
| |
|
| |
 MSDS |
EVOHTF
NOBURST HD® Heat Transfer Fluid: Propylene Glycol-based solution for freeze protection with high temperature resistance. 5 Gallon bucket.
Minimum Temperature Protection: -40°F
Maximum Temperature Protection: 325° F |
| |
|
| |
 |
EVOMV
Multi-Valve. Combination Fill and Drain Valve (3/4"GHT), Balancing Valve
and Flow Meter with integrated Check [0-4 GPM], (3/4" NPT Union by 3/4"
Female NPT). |
| |
|
| |
 |
EVOFB
Filterball® - 1/4 turn, lever operated, corrosion-resistant brass ball valve, equipped with standard 20 mesh screen. 100% full port, blow-out proof stem/two-piece design. Made in Italy. 100% tested. 150 WSP, 400 WOG. |
| |
|
| |
 |
EVOBV
Brass ball valve (ecologically washed body), double Viton® O-ring stem seal, Hostaflon seats, TEA coated brass ball, extruded brass stem, 100% full port, blow-out proof stem/two-piece design, Made in Italy. NSF 61-8, CSA 125g, UL, FM Listed, 150WSP, 600-400WOG |
| |
|
| |
 |
EVOCV
Brass horizontal swing check valve, prevents back-flow and thermal heat loss in hydronic systems. MUST be installed on horizontal pipe run. 200 WOG |
| |
|
| |
 |
EVOCF-R
Collector fitting, reducer, 1" x 3/4" copper to copper |
| |
|
| |
 |
EVOCF-SC
Collector fitting, straight coupler, 1" copper to copper |
| |
|
| |
 |
EVOCF-C
Collector fitting, caps, 1" copper to copper |
|
|
